Fudia PATA based FSD700P series 1.8"" industrial grade SSD is a non-volatile, solid state data storage system, and has become a more popular storage media solution, compared to conventional Hard Disk Drive (HDD). Due to lack of any mechanical components, SSD provides a more robust and cost effective storage solution for any embedded application.

  Since SSD comes with a standard ATA interface which is fully compatible with traditional HDD, designers will find Fudia PATA based FSD700P series 1.8"" industrial grade SSD as an easy solution for integration in PC-based systems.

Flash Type SLC MLC
43 n.m. 32 n.m.
Capacity 2 GB ~ 64 GB 4 GB ~ 256 GB*
Read/Write (Max.) Performance Read: 88 MB/s Read: 80 MB/s
Write: 70 MB/s Write: 45 MB/s
Operation Temperature Normal temperature series → 0 ~ +70°C
Wide temperature series → -25 ~ +85°C
Storage Temperature Normal temperature series → -40 ~ +85°C
Wide temperature series → -40 ~ +85°C
Vibration Resistance 20 G (80 ~ 2,000 Hz)
Shock Resistance 1,500 G (0.5 msec.)
Standard ATA/IDE BUS interface ATA Command set compatible
512 Bytes/Sector
Data Transfer Mode PIO mode 4
Multiword DMA mode 2
Ultra DMA mode 6
Intelligent ATA/IDE Module Implements dynamic wear-leveling algorithms and static wear- leveling algorithms to increase endurance of flash media.
Built in Embedded Flash File System.
Storage ECC hardware desgin, correcting up to 48 bits
random error per 2 K bytes.
Operating Voltage DC 3.3V
Certificates Acquired RoHS \ WHQL \ CE \ FCC
* MLC solution is produced upon requested only.
Home | Fudia | | News |Products | Support | Contact  
Copyright© 2019 Fusion Media Tech. Co. Ltd., All rights reserved.