Fudia FSD700P series Industrial Grade 50-pin SCSI SSD is made by Fudia in Taiwan, uses an industry standard 2.5” SATA SSD (Solid State Disk) and converts it into a 3.5”50-pin Single Ended SCSI hard disk drive. It does not require any special software/device driver and is the ideal drop in replcements for legacy SCSI hard disk drives.

Flash Type SLC
Form Factor 50 Pin 3.5 inch
Support Capacity 1 GB ~ 512 GB
Interface Convert SATA SSD to SCSI interface
Support Support a SATA hard drive of 1.5G/3.0G
Support SCSI RAID card
Provides Flash ROM for firmware update
Jumper Setting Selectable SCSI ID from 0 to 7
Delay Start
Write Protect
Parity Seeting
SCSI terminator
HDD Access LED
Features Converts low-price SATA device to high-performance SCSI interface delivers great savings
Creates new SCSI devices in economic cost
Designed in 3.5” form factor for a built-in 2.5” SATA hard disk drive
Supports most Ultra SCSI interfaces
Easy to install and use
Cross-platform operation supports Windows NT/2000/XP/2003/Vista, Linux, Mac, Sun
Transfer Rate 20.0 MByte/sec (MAX)
Operation Temperature -40°C ~ +80°C
Storage Temperature -40°C ~ +80°C
Vibration 15 G (20 ~ 2,000 Hz)
Humidity 15% to 90%
Shock 1,000 G/0.5 ms
Power supply DC 5V ± 5%
Size: 14.6cm (L) x 10.1cm (W) x 2.5cm (H)
Country Of Origin Made in Taiwan
Certificates Acquired RoHS \ WHQL \ CE \ FCC
Home | Fudia | | News |Products | Support | Contact  
Copyright© 2019 Fusion Media Tech. Co. Ltd., All rights reserved.